Rheem’s highly efficient Residential Hybrid Electric Water Heater is offered in 40, 50, 65 and 80-gallon sizes to fit your needs. With easy installation and rebates available from most electric utilities, these tanks are one of the most cost-effective ways to heat water.
- 10 Year Limited Tank and Parts Warranty
- Quiet Operation
- Low Lead Compliant
- Grid-Enabled for Utility-Level Performance Monitoring
- Meets NEEA Tier 3 Requirements
- EcoNet® Smart Technology enabled
- Five operation modes to fit any setting: Energy Saver, Heat Pump, High Demand, Electric and Vacation
- 3.50 UEF
Complete Your Installation
Is a Hybrid or Heat Pump Water Heater (HPWH) a good fit for my home?
Each home is a little different, so please carefully consider each of the following questions about your installation location. If you’re unsure or need more info, please give us a call!
Sound: Is your water heater located where sound could be a nuisance? HPWHs generate sounds at about the level of a modern dishwasher (around 49 decibels) – it’s not loud, but as you likely are not used to your water heater making any noise, this is something to consider.
Cool air: Is your water heater located in living space? While in operation, HPWHs release cool, dry air into the surrounding space. Ducting can be used to exhaust the air to the outside (if adjacent to an exterior wall).
Space: Do you have 700 cubic feet of space around the water heater? HPWHs require this amount of air-flow to operate most efficiently. Units can be installed in smaller areas if ducting or other air-flow strategies are used.
Size/height: Do you have adequate height clearance? HPWHs are slightly larger than similar capacity standard water heaters. They also require an additional 6” top clearance to access the air filter.
Condensate. Do you have a location to route the condensate? HPWHs produce condensate that must be routed to a floor drain, other plumbing drain, or to a condensate pump.
Click Documents tab above for complete product specs.