Scaltrol HSC-50 Complete Assembly - 50,000 Gallon, High Temperature

Water is known as the universal solvent. Most water supplies are usually saturated with large amounts of minerals, such as calcium carbonate (lime scale), calcium sulfate, iron and manganese, which can cause corrosion and scaling. When water is saturated with minerals, any increase in temperature or pressure drop will cause the minerals to form scale. So, water passing through a water faucet, shower head, or the heat in a water heater will change with the waters ability to hold the dissolved minerals in suspension.

Features:

The Scaltrol HSC-50 assembly includes both the housing and a new Scaltrol cartridge*. The HSC model is essentially the same as the SC-50 except it is designed to handle higher temperatures and higher pressures for specialty applications where hot water or high pressure will going through the Scaltrol unit. The HSC- 50 will treat up to 50,000 gallons at pressures up to 200psi and at temperatures from 120F up to 200F.

*Cartridges are considered consumables and are not covered under warranties.

Energy Savings

A layer of scale 1/4” on a heating element will decrease the efficiency and will subsequently increase your energy bills by up to 40%. Scaltrol stops mineral scale by introducing a measured amount of sequestrant into the water. The mineral molecules, which have a positive charge, are attracted to and held in suspension by the negative charge of the sequestrant. The mineral molecules are unable to join together, so scale is unable to form.

Specifications

Waterflow: up to 10GPM
Max Pressure Head & Sump: 200PSI
Max Temperature Head & Sump: 200°F (93°C)
Dimensions: 4.5” wide x 7.5”